DaranEner R101 Lite Power Station for Ghost Hunting

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases.

DaranEner R101 Lite for paranormal investigations

A camera battery dying halfway through a vigil can leave a gap in your recording. The DaranEner R101 Lite is a compact backup power option for compatible investigation equipment when a wall outlet is out of reach.

This listing is a specification-based overview, not a hands-on test. It is a power supply, not a paranormal detector.

Verified power specifications

• 89.6Wh LiFePO4 battery
• 100W rated AC output, with a listed 200W peak; 110V AC
• Two AC outlets, two USB-C ports, two USB-A ports and one DC output
• USB-C1: up to 100W output and 65W input; USB-C2: up to 30W output
• USB-A: up to 18W per port; DC5521 output: up to 60W
• Listed dimensions: 6.5 × 3.3 × 4 inches; listed weight: 2.5 lb

Port ratings are individual limits, not a promise that every port can deliver its maximum simultaneously. The seller states that AC output shuts off below 9% charge.

Ways to use it on a ghost hunt

Keep compatible cameras and recorders charged

Use an appropriate USB cable or the device’s approved charger to top up equipment between sessions. Some cameras and EVP recorders can operate from external power; others only charge while switched off. Confirm your model’s behavior before relying on it for continuous recording.

Support lights and a small observation station

A compatible low-power LED or infrared illuminator can help with setup or camera coverage. Check voltage, connector polarity and wattage first, especially for barrel-plug accessories. Keep visible setup lighting separate from experiments where darkness is part of the procedure.

Recharge phones and compatible laptops

Keep a phone available for maps, check-ins and session notes. A compatible USB-C laptop may also be useful for reviewing clips at a base table. Leave enough battery reserve for packing up and getting home rather than using every remaining watt-hour during the investigation.

Plan runtime and avoid false readings

Runtime depends on the equipment connected, conversion losses and battery condition. Add up your actual device loads and test the complete setup before an overnight visit. The peak rating is not a continuous operating allowance; do not treat the two AC outlets as two independent 100W power supplies.

Position the station and charging cables away from sensitive EMF measurements and microphones. Compare readings and recordings with the station off and on, and note when charging starts or stops. This helps identify equipment-related changes before interpreting an unusual reading.

Secure cables so nobody trips in the dark. Bring spare device batteries where possible, and do not assume this small station will power an entire investigation rig all night.

Build your investigation kit

Browse our digital recorders and ghost hunting accessories to plan a compatible setup.

View the DaranEner R101 Lite on Amazon for current options and the full seller specifications.

Featured image: AI-created product visualization based on the product reference. Background equipment is illustrative and is not included.