Adobe Audition Noise Reduction Process



Use Adobe Audition’s Noise Reduction (process) to reduce steady background noise in a recording. First capture a noise print from a passage that contains only the background sound. Then preview the effect on the passage you want to clean. Work on a copy so you can compare the result with the original.

Paranormal interpretations of audio are unproven. What noise reduction can do is make a recording cleaner; it cannot tell you whether a sound has an extraordinary origin. Treat editing as a tool for clarity and honest presentation, not as proof.

Why Clean Recordings Start in the Field

Noise reduction software works best when it has the least to do. The more hiss, wind, and handling noise you capture, the more aggressive your settings must become — and aggressive settings are exactly where artifacts creep in.

Hands adjusting a portable recorder beside headphones

Field habits that make cleanup easier

  • Capture a noise-only sample. Record 10–30 seconds of the room or location with no one talking. This gives you a place to select a representative noise print later.
  • Set levels conservatively. Aim for peaks well below clipping. Clipped peaks can lose detail that restoration cannot reliably recover.
  • Check the recorder’s low-cut setting. A low-cut filter can reduce rumble and also remove low-frequency detail. Log any filtering applied during recording.
  • Keep notes. Log what you heard in real time, what equipment was running, and where you stood. Compare those notes against the file during editing so you do not “discover” a sound that came from a nearby HVAC unit.
  • Keep the original recording format. Use settings suited to your recorder and workflow. When applying a saved noise print, Adobe requires the same sample type.

If you are still choosing a device, our guide to EVP recorders covers what to look for before you ever open editing software.

Getting Started: Set Up the Session Correctly

  1. Import and duplicate. Open the file in Audition’s Waveform view and save a duplicate as your editing copy. Keep the original untouched — always.
  2. Save separate Waveform copies. If you plan to try several approaches, save versions separately (for example, “take1_light” and “take1_moderate”) so results can be compared side by side.
  3. Document the chain. Write down every effect and setting you apply. This is essential for providing honest, reproducible evidence.
  4. Listen on neutral headphones. Use the same headphones and similar playback loudness for both versions.

The Adobe Audition Noise Reduction Process, Step by Step

Noise Reduction (process) is an offline effect in the Waveform Editor. A noise print works best for a steady sound such as fan hiss. If the background changes substantially, see Adaptive Noise Reduction in Adobe Audition. See Adobe’s current noise reduction instructions for the menus and controls.

Illustration of a spectral frequency display for audio review

Step 1: Capture the noise print

In Waveform, select at least half a second of representative background noise with no speech, footsteps or other sounds you want to preserve. Choose Effects > Noise Reduction/Restoration > Capture Noise Print. Sample from the same recording when possible. If you cannot find a suitable noise-only passage, leave the original intact and consider a different cleanup method.

Step 2: Select the passage and adjust the effect

Select the section with the same background noise and open Effects > Noise Reduction/Restoration > Noise Reduction (process). Preview a small adjustment before applying it.

Noise Reduction (process) controls
Control What it does
Noise Reduction Controls the percentage of noise reduction.
Reduce By Sets the reduction of detected noise in decibels (dB).
Output Noise Only Lets you audition what the effect would remove. Turn it off before applying the effect to the listening copy.
Smoothing Can soften warbling artifacts. Increasing it may leave more background noise.

Step 3: Preview — with headphones and without

Compare the same passage before and after at similar playback loudness. Try Output Noise Only during preview. If the removed audio includes recognizable speech or details you want to keep, reduce the effect. Listen for bubbling, chirps or thinning consonants in the processed version.

Step 4: Apply a light pass and compare

Apply one light pass to the copy. If the noise still distracts, compare the first result with a separate copy using a different setting. Save the version that preserves the relevant detail and log the settings.

Step 5: Match additional cleanup to the problem

Review the nature of the noise before adding effects. For a steady electrical tone, test DeHummer. For low rumble, try a high-pass filter and listen for lost low-frequency detail. For an isolated click, mark its location in the log or test a targeted repair away from the sound you are investigating. Compare each stage with the original.

Step 6: Export and document

Export a lossless copy (WAV or FLAC) for the archive, and a compressed copy only for sharing. Label the processed file clearly and keep the raw original alongside it. Anyone reviewing your evidence should be able to hear both.

Common Mistakes in Audio Review

These habits make it harder to tell what was captured and what the processing changed:

  • Removing every bit of background noise. If room tone and quiet details disappear, compare with the original and reduce the effect.
  • Listening for words after processing. Once you expect to hear a phrase, your brain will help you find it. Form conclusions from the raw file first, then compare against the cleaned version.
  • Over-interpreting reverse, slowed, or heavily filtered audio. These changes can reshape timing or pitch and influence what listeners hear. Present such manipulations as interpretive experiments, not findings.
  • Ignoring ordinary causes. HVAC clicks, refrigerator compressors, vehicle traffic, footfalls, fabric brushing a microphone, and a nearby radio or phone can all produce sounds that seem anomalous in isolation.
  • Skipping the documentation. An edited clip without a raw counterpart and a processing log is not defensible evidence.

Use the EVP recording guide to capture a better source file and the blind EVP review workflow to compare listener notes before sharing a suggested transcript.

When to Use Audition — and When Not To

Use a noise print for a background sound that remains consistent through the selected passage. On spirit box recordings, preserve radio fragments and static in the original. If a phrase appears only after processing, mark the interpretation as inconclusive.

Keep the original version with your session notes and share any processed version as a labeled listening copy. Use the same start and end times so reviewers can compare the files.

A brief note on safety and permissions

  • Obtain explicit permission before recording or entering private property, and follow all posted rules at public sites.
  • Check local and state laws on recording conversations; consent requirements vary, and you are responsible for compliance.
  • Do not investigate unsafe structures alone, and never let recording gear tempt you into restricted areas.

What to Save With the Processed Copy

Keep the original, a lossless review copy, the timestamp of the selected noise print, the processed time range and a record of each setting you applied. These details let another listener reproduce the comparison and check the sound in context.

Share post


Discover more from Haunt Gears

Subscribe to get the latest posts sent to your email.

Leave a Reply

Your email address will not be published. Required fields are marked *

more insights

Share via
Copy link