GhostStop Footstep Tracker 2 Geophone

Description

The GhostStop Footstep Tracker 2 geophone monitors surface vibration and displays changes during stationary observation. It can help you document bumps or movement transmitted through a floor or table. It does not identify who or what caused a vibration, and an alert does not establish paranormal activity.

Affiliate disclosure: HauntGears may earn a commission if you purchase through our GhostStop link, at no extra cost to you. The purchase is completed with GhostStop, which handles the order and fulfillment.

Footstep Tracker 2 features and limits

Feature	What to know
Live LED bar	Shows relative vibration strength, not the identity of a source.
Peak marker and audible alert	Draw attention to a detected event; note the time in your own log.
Event counter	Groups readings into events rather than counting each footstep.
Adjustable sensitivity	Test background conditions before settling on a setting.
USB-C power	Rechargeable and usable while connected to a suitable USB power source.

Set up a useful vibration baseline

1. Place the unit on a stable surface at a location you can describe in your notes. Keep cables and the device out of walking routes.
2. Test your own footsteps and a light, deliberate movement near the setup. Note how the display responds at the chosen sensitivity.
3. Observe the room without deliberately moving around. Record nearby traffic, appliances and other sources that could transmit vibration.
4. Keep the position and sensitivity consistent. If either changes, mark that in your notes.
5. Record the event total before switching off. GhostStop says the counter resets when power is lost or the unit is turned off.

If you are also recording audio, note the device’s alert tone so it is not later mistaken for an unexplained sound. A change in surface, distance or sensitivity can change the response; compare readings with their context.

Power and included items

GhostStop lists about 12 hours of operation on a full charge under normal conditions. Frequent triggering can shorten runtime, so treat this as a manufacturer estimate rather than a guaranteed session length.

The listed contents are the Footstep Tracker 2 and a USB-C cable. A wall adapter or portable USB power pack is separate. Check the seller’s current included-items information and operating instructions before buying.

Common buying questions

Does five events mean five footsteps?

No. GhostStop explains that multiple vibration readings from a sequence of steps can be grouped as one event. The display total is not a reliable count of footsteps, people or causes.

Is this an EMF meter or a REM pod?

No. This product uses a geophone to respond to vibration. Do not interpret its display as an electromagnetic-field measurement or assume that sharing a shop category makes different instruments equivalent.

Does the counter save a permanent investigation log?

The displayed total resets when the unit loses power. Keep separate notes, photographs or authorized video of the readings you need to preserve; do not rely on the counter as your only record.

Can it confirm an unexplained presence?

No. Vibrations may come from people, traffic, machinery or movement of the supporting surface. An alert records a response, not its cause. This description is based on manufacturer documentation, not personal testing.

Compare instrument types in our Motion Sensors & REM Pods category, or start with the beginner equipment guide before deciding what to add to your kit.

Feature and operating details checked against GhostStop’s Footstep Tracker 2 product page and instructions. Check the seller for current model details and purchase terms.